Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car



Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   Specifications
   Removal and installation of assembly of the forward shock-absorber with a screw spring
   Replacement of the shock-absorber or screw spring of rack-mount assembly of a forward suspension bracket
   Removal and installation of the forward stabilizer of cross stability with basic plugs
   Removal and installation of the top control lever of a forward suspension bracket
   Removal and installation of the lower control lever of a forward suspension bracket
   Removal and installation of a rotary fist and stupichny assembly
   Removal and installation of assembly of a forward nave with the wheel bearing
   Replacement of spherical support
   Removal and installation of assembly of the back shock-absorber with a screw spring
   Removal and installation of a bar of the back stabilizer of cross stability with basic plugs
   Removal and installation of assembly of a back nave with the wheel bearing
   Removal and installation of levers of a back suspension bracket
   Removal and installation of a steering wheel
   Removal and installation of tips of steering drafts
   Replacement of protective covers of the steering mechanism
   Removal and installation of the steering mechanism
   Removal and installation of the steering pump
   Removal of air from a hydraulic path of system of strengthening of a wheel
   Wheels and tires - the general information
   Angles of installation of wheels
+ Body
+ Onboard electric equipment




Removal and installation of the lower control lever of a forward suspension bracket

 PERFORMANCE ORDER

1. Weaken nuts of fastening of the corresponding forward wheel. The car also establish to Poddomkratta it on props. Remove a wheel.
2. Disconnect from the lower lever of a suspension bracket a bar of the stabilizer of cross stability (see Removal and installation of the forward stabilizer of cross stability with basic plugs).
3. Disconnect from the lever a damping fork (see Removal and installation of assembly of the forward shock-absorber with a screw spring).

4. Take the forelock and weaken a koronchaty nut of a spherical finger of a support of the lower lever. Do not remove a nut finally yet. By means of a stripper release a spherical support from a rotary fist (see an accompanying illustration). Now finally give a koronchaty nut.

5. Turn out an axial bolt from the inside of the lower control lever (see an accompanying illustration). Separate the lever from the car chassis.

6. Give a nut of a back axial hairpin of the lower lever (see an accompanying illustration). Take a hairpin from the plug and remove the lever.


Need for a reversing of three bolts of an assembly bracket of the plug arises only in case of replacement of the last.


7. Installation is made upside-down.