Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car



Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and bottom of the car
   Care of vinyl elements of finishing
   Care of an upholstery and carpets of salon
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and locks of the car
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of assemblies of forward and back bumpers
   Removal and installation of forward wings
   Removal and installation of a latch, cylinder of the lock and emphasis of a door of a back
   Removal, installation and adjustment of a door of a back
   Removal and installation of a latch, cylinder of the lock and emphasis of a cover of the luggage compartment
   Removal, installation and adjustment of a cover of the luggage compartment
   Driving cables of an otpuskaniye of locks of covers of the luggage compartment and hatch of a jellied mouth of the fuel tank
   Removal and installation of an internal upholstery of doors
   Removal, installation and adjustment of provision of doors
   Removal and installation of latches and cylinders of locks and external and internal handles of doors
   Removal and installation of door glasses
   Removal and installation of the regulator of a window regulator
   Removal and installation of rear-view mirrors
   Removal and installation of the central console
   Removal and installation of the dashboard
   Removal and installation of a casing of a steering column
   Removal and installation of an instrument guard
   Removal and installation of a forward fairing
   Removal and installation of seats
   + Control body sizes
+ Onboard electric equipment




Removal and installation of a latch, cylinder of the lock and emphasis of a cover of the luggage compartment

Lock latch

 PERFORMANCE ORDER

1. Open a cover of the luggage compartment and lead round a marker a latch of its lock for the purpose of simplification of the procedure of installation it into place.

2. Give a bolt and a nut of fastening of a castle latch (see an accompanying illustration).

3. Remove a latch and disconnect a driving cable and an electrical wiring (see an accompanying illustration).

4. Installation is made upside-down.

Lock cylinder

 PERFORMANCE ORDER

1. Open a luggage carrier. Through a special opening in a cover also disconnect a driving cable from the lock cylinder.
2. Turn the lock cylinder on 90 ° counterclockwise for the purpose of combination of lock uvulas of a clamp with reciprocal grooves. Having pulled the cylinder on itself, take it from a cover of the luggage compartment.
3. Installation is made upside-down.

Cover emphasis

 PERFORMANCE ORDER

1. Lift a cover of the luggage compartment and reliably record it in open situation.
2. Having turned out two fixing bolts, отсо you edinit the top end of an emphasis.
3. Having hooked the small screw-driver, remove a decorative cover, then turn out a bolt of fastening of the lower end of an emphasis and remove the last from the car.
4. Installation is made upside-down.