Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car



Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
- Maintenance instruction
   Arrangement and functions of governing bodies
   Keys and locks
   Adjustment of seats
   The equipment and governing bodies in salon
   Heater and air conditioner
   Control system of a microclimate of salon
   Audio system
   Security systems
   Running in of the new car
   Unlocking of a cowl
   The valve of shutdown of supply of fuel in case of accident (on some models)
   Start of the engine
   Five-step manual box of gear shifting
   Automatic transmission
   Stepless variator (separate models)
   Devices of external lighting and alarm systems of the trailer
   Check of level of liquid in automatic transmission
   Driving belts
   Emergency closing of the panel of the hatch of a roof
   Safety locks
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


http://flashlottos24.ru/



Adjustment of seats

Adjustment of front seats


Before beginning the movement, adjust the provision of a seat. To adjust the longitudinal provision of a seat, raise the clamp lever located in front under a seat pillow. Holding the lever, shift a seat forward or back in situation, convenient for you. Then release the clamp lever. For check of reliability of fixing of a seat try to shift it forward and back.

To change a seatback tilt angle, raise the clamp lever located sideways on the basis of a seat pillow (from a door). Holding the lever, bring a back into a comfortable position, then release the clamp lever.

At the same time the back will be recorded in new situation.

CARS WITH A 3-DOOR BODY THE HATCHBACK

For ensuring convenience of landing of passengers to a back seat and their exit from the car of a back of front seats can bend forward. Handles of release of clamps are located sideways on seatbacks (from doorways).

CARS WITH A 5-DOOR BODY THE HATCHBACK

Adjustment of an inclination of a back of a front seat is carried out by means of the rotating handle (back) which is located sideways on the basis of a seat pillow.

The big inclination of a seatback worsens protective properties of a seat belt. At accident you can dive under a belt and suffer serious injuries. During the movement on the car bring a back into vertical position. Sit down so that your back completely leaned on a seatback.

Adjustment of height of a pillow of a seat of the driver (separate models)


The pillow of a driver's seat can be regulated on height. Adjustment is made by rotation of the regulator which is located on the basis of a seat pillow at the left.

Electric adjustment of a seat of the driver (separate models)

Your car can be equipped with a driver's seat with electric drives of adjustment. Two switches of electric adjustment are located on the basis of a seat pillow at the left. The combined switch with the long horizontal handle is intended for adjustment of longitudinal and vertical position of a seat, and the switch with the short vertical handle – for adjustment of an inclination of a back.

The seat can be adjusted at any provision of a key in the ignition lock. Before beginning the movement, adjust the provision of a seat.


Press the handle of the combined switch forward or back to move up or distance a seat from a steering wheel and pedals of management.


Press up or down the forward end of the handle of the combined switch to raise or lower a first line of a pillow of a seat. Similarly press up or down the back end of the handle of the combined switch to raise or lower a back part of a pillow of a seat.


To raise or lower a seat pillow entirely, press up or down the central part of the handle of the switch.


Adjust a seatback inclination, rejecting the vertical handle of the switch which is located behind the combined switch in the relevant party.

The big inclination of a seatback worsens protective properties of a seat belt. At accident you can dive under a belt and suffer serious injuries. During the movement on the car bring a back into vertical position. Sit down so that your back completely leaned on a seatback.

Head restraints


On front seats of your car head restraints are established. On some modifications of the car head restraints are established also on a back seat. Head restraints help to prevent injuries of a neck and the head. In order that head restraints could execute the protective functions, they have to be correctly adjusted. The top part of a pillow of a head restraint has to be flush with the upper edge of an auricle.

On some modifications of the car the possibility of adjustment of head restraints on height is provided. Adjustment of a head restraint is made by two hands at the same time therefore it is not necessary to try to adjust a head restraint during the movement of the car. To lift a head restraint, just pull it up. Unlike it for lowering of a head restraint it is necessary to press the clamp button previously.

Dismantle of a head restraint is made for cleaning or replacement as follows. Lift a head restraint up to the end. Then press the button of a clamp and remove a head restraint from a seatback.

Operation of the car without head restraints can bring in an accident case to serious traumatizing the driver and passengers.
Check existence of head restraints on the places and adjust their situation properly.

Folding of a back of a back seat (separate models)

The back of a back seat is executed separate, and consists of two parts which can develop forward, opening direct access to a luggage carrier. The clamps of a back of a back seat locking it in normal situation can be released both from interior of the car, and from a luggage carrier.

Each of two sections of a back back can develop irrespective of another forward.


Turn the handle фиксато

ра clockwise to put the left section, or counterclockwise to put the right section of a back.


To put a back of a back seat from a luggage carrier, pull for clamps which are located under the back shelf.

After return of sections of a back of a back seat to normal situation strongly press them towards the back shelf to record on the place. Check reliability of inclusion of clamps of a back back, having pulled for the upper edge of a back on themselves. After return of a back of a back seat to vertical position check that straps of both diagonal and zone belts settled down over a back.

Make sure that all things which are in a luggage carrier or act from a luggage carrier in interior of the car, are reliably attached. The loose baggage can dart off and injure the driver and passengers in case of emergency brake application of the car.

CARS WITH A 3-DOOR BODY THE HATCHBACK


To put sections of a back of a back seat (at the same time or separately), lift the clamp button which is located from above on each section.

CARS WITH A 5-DOOR BODY THE HATCHBACK


Before putting back sections, turn a pillow of a back seat in vertical position so that she got up behind front seats. For this purpose use the loop attached to the rear edge of a pillow of a seat. Take out head restraints from a back and insert them probes into the openings executed in the seat pillow basis. Then put sections of a back of a back seat.

It is not necessary to move with an open trunk lid and the put back of a back seat, at the same time there is a possibility of poisoning with carbon monoxide (SO).