Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car

Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
- Gear shifting box
   - 5-staged manual box of gear shifting
      General information
      Replacement of epiploons of power shafts
      Check of a state and replacement of a support of the transmission
      Removal and installation of draft of the drive of gear shifting
      Check and replacement of the sensor switch of fires of a backing
      Removal and RKPP installation
      Capital repairs of RKPP - the general information
   + 4-staged and stepless automatic transmissions (ат and cvt)
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Check of a state and replacement of a support of the transmission


1. A car front also establish to Poddomkratta it on props.

2. Get a sting of mount or the big screw-driver between the jet lever of a support and a frame and try to move assembly (see an accompanying illustration).

3. The vertical movement of the jet lever should not exceed 12.7÷19.0 of mm, otherwise replace a support.
4. For replacement raise transmission a jack and give bolts and nuts of fastening of a support.

Do not perform any works under the car, the lifted situation withheld in by means of only one jack at all!

5. Installation is made upside-down.