Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car



Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling and power shafts
- Brake system
   Specifications
   System of anti-blocking of brakes (ABS) - the general information and codes of malfunctions
   Replacement of brake shoes of disk brake mechanisms
   Removal, repair and installation of supports of disk brake mechanisms
   Check of a state, removal and installation of a brake disk
   Replacement of boots of drum brake mechanisms of back wheels
   Removal and installation of wheel cylinders
   Removal and installation of the main brake cylinder
   Check of a state and replacement of brake lines and hoses
   Pumping of the brake system
   Check of serviceability of functioning/tightness, removal and installation of assembly of the vacuum amplifier of brakes
   Adjustment of the parking brake
   Replacement of a cable(s) of the drive of the parking brake
   Check of serviceability of functioning, replacement and adjustment of the sensor switch of stoplights
   Check of serviceability of functioning and replacement of the sensor switch of level of brake fluid
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


http://flashlottos24.ru/



Specifications

General parameters

Characteristic

Value

Pedal of a foot brake

 

   Free wheeling, mm

 

      Civic

1.6÷4.8

      Integra

1.6÷5.2

   Height, mm

 

      Models with RKPP

 

         Civic

153.2

         Integra

160.3

      Models with AT/CVT

 

         Civic

160.3

         Integra

165.1

Course of the lever of the parking brake

See the Head Routine maintenance

Gap between a pusher of the vacuum amplifier and the GTTs piston (with a depth of depression of 508 mm of mercury. on the amplifier), mm

0.0÷0.5

Disk brake mechanisms

Characteristic

Value

Minimum admissible thickness of brake shoes

See the Head Routine maintenance

Minimum admissible thickness of a disk

See marking on a disk

Maximum admissible size of differences of thickness of a disk (overlapping), mm

0.015

Maximum admissible beating of a disk, mm

0.102

Drum brake mechanisms

Characteristic

Value

Minimum admissible thickness of frictional overlays of brake boots

See the Head Routine maintenance

Maximum admissible internal diameter of a drum

See marking on a drum

Efforts of tightening of threaded connections, Nanometer

Connection type

Value

Hollow bolt of nipple knot of connection of a brake hose to a support of the brake mechanism (forward and back)

34

Bolts of a forward support

 

   Civic (see identification marking on the support case)

 

      Support of type 5410

33

      Support of type 2056

34

         Top bolt

34

         Lower bolt

27

   Integra

 

      Issue models from 1994 to 1997

31

      Issue models since 1998.

33

Bolts of fastening of an anchor bracket of a forward support

108

Bolts of a back support

56

Nuts of fastening of wheel cylinders

9.5

Nuts of fastening of the vacuum amplifier of brakes

12.2

Nuts of fastening of GTTs

14.9