Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car

Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling and power shafts
- Brake system
   System of anti-blocking of brakes (ABS) - the general information and codes of malfunctions
   Replacement of brake shoes of disk brake mechanisms
   Removal, repair and installation of supports of disk brake mechanisms
   Check of a state, removal and installation of a brake disk
   Replacement of boots of drum brake mechanisms of back wheels
   Removal and installation of wheel cylinders
   Removal and installation of the main brake cylinder
   Check of a state and replacement of brake lines and hoses
   Pumping of the brake system
   Check of serviceability of functioning/tightness, removal and installation of assembly of the vacuum amplifier of brakes
   Adjustment of the parking brake
   Replacement of a cable(s) of the drive of the parking brake
   Check of serviceability of functioning, replacement and adjustment of the sensor switch of stoplights
   Check of serviceability of functioning and replacement of the sensor switch of level of brake fluid
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Adjustment of the parking brake


1. Remove the handle from the gear shifting lever (see the Head Korobk of gear shifting).
2. Remove the central console (see the Head Kuzov).
3. Prop up antiretractable boots forward wheels, then a back of the car and establish to a poddomkratta it on props. On one click cock the lever of the parking brake.

4. Manually rotating back wheels, tighten clockwise an adjusting nut on assembly of the equalizer of the hummock drive of the parking brake (see an accompanying illustration). Stop tightening of a nut as soon as wheels begin "to be taken". Release the lever of the parking brake and make sure that back wheels rotate freely. At the correct adjustment of the drive the course of a control lever of the parking brake has to correspond stipulated in Specifications to the Head Routine maintenance of the present manual.

5. Lower the car on the earth, then install into place the central console (see the Head Kuzov) and the gear shifting lever handle (see the Head Korobk of gear shifting).