The device, service, repair of Honda Civic and Acura Integra - Specifications//since 1994 release / civic2.ru

Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car



Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
- Routine maintenance
   Schedule of routine maintenance
   Specifications
   General information about settings and adjustments
   Check of levels of liquids (each 400 km of a run or weekly)
   Check of a condition of tires and pressure of their rating (each 400 km of a run or weekly)
   Check of level of liquid of the power steering (each 4 800 km of a run or time in three months)
   Check of the ATF AT/CVT level (each 4 800 km of a run or time in three months)
   Replacement of motive oil and oil filter (each 4 800 km of a run or time in three months)
   Check of a state and replacement of brushes of screen wipers (each 12 000 km of a run or time in 6 months)
   Check, service and charging of the rechargeable battery (each 12 000 km of a run or time in 6 months)
   Check of a state, adjustment of effort of a tension and replacement of driving belts, (each 12 000 km of a run or time in 6 months)
   Check of a state and replacement of the hoses located in a motive compartment (each 12 000 km of a run or times in 6 months)
   Check of a condition of components of the cooling system (each 12 000 km of a run or time in 6 months)
   Rotation of wheels (each 12 000 km of a run or time in 6 months)
   Check of the brake system (each 12 000 km of a run or time in 6 months)
   Check of a condition of seat belts (each 24 000 km of a run or time in 12 months)
   Check and adjustment of gaps of valves (each 24 000 km of a run or time in 12 months)
   Replacement of the filtering air cleaner element (each 24 000 km of a run or times in two years)
   Check of a condition of components of a power supply system (each 24 000 km of a run or time in 12 months)
   Check of level of the RKPP gearbox oil (each 24 000 km of a run or time in 12 months)
   Survey of components of a suspension bracket and steering drive, check of a condition of protective covers of power shafts
   Check of a condition of components of system of production of the fulfilled gases (each 9600 km of a run or times in 6 months)
   Check of a state and replacement of spark plugs
   Check of a state and replacement of VV of candle wires, a cover and the runner of the distributor (each 48 000 km of a run or time in 24 months)
   Check and replacement of the valve of system of the operated ventilation of a case (PCV) (each 48 000 km of a run or times in 24 months)
   Replacement of the fuel filter (each 48 000 km of a run or time in 24 months)
   Check and adjustment of turns of idling (each 48 000 km of a run or time in 24 months)
   Service of the cooling system (depletion, washing and filling) (each 48 000 km of a run or time in 24 months)
   Replacement of brake fluid (each 48 000 km of a run or time in 24 months)
   Replacement of liquid of automatic transmission (AT/CVT) (each 48 000 km of a run or time in 24 months)
   Replacement of the RKPP gearbox oil (each 48 000 km of a run or time in 24 months)
   Dumping of the counter of the indicator of intervals of service
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


http://flashlottos24.ru/



Specifications

The recommended lubricants and liquids

The lubricants and liquids recommended for use of cars by the company manufacturer at the time of drawing up the present manual are listed below. Fresher information can be obtained at company car repair shops of the Honda company.


Characteristic

Value

Motive oil:

   Type

Universal SG, SH or SJ oils on API

   Viscosity

Are specified in the card (see an illustration below)

Type of transmission liquid for AT

ATF Honda Premium Formula

Type of transmission liquid for CVT

ATF Honda CVT

Type of gearbox oil for RKPP

MTF Honda

Type of brake fluid

DOT 3

Type of liquid of system of hydrostrengthening of a wheel

Hydraulic liquid for the steering Honda amplifier

Fuel type

Unleaded gasoline with octane number not lower than 87

Card of viscosity of motive oils

Volumes of working liquids, l *

Characteristic

Value

Motive oil

   Civic

      D16Y5 engine

3.3

      D16Y7 engine

3.6

      D16Y8 engine

3.3

   Integra

 

      B18B1 engine

3.8

      B18C1 and B18C5 engines

4.0

Transmission liquid for AT (depletion and filling)

2.7

Transmission liquid for CVT (depletion and filling)

3.9

RKPP

 

   Civic

1.8

   Integra

2.2

Cooling liquid

 

   Civic

3.0

   Integra

 

      B18B1 engine

4.4

      B18C1 and B18C5 engines

4.7

* All volumes are specified only approximately. At adjustment be verified with-level tags.

System of ignition

Characteristic

Value

Spark plugs

 

   Civic

 

      D16Y5 engine

 

         Type

NGK ZFR4F-11

         Interelectrode gap, mm

0.99÷1.09

      D16Y7 and D16Y8 engines

         Type

NGK ZFR5F-11

         Interelectrode gap, mm

0.99÷1.09

   Integra

      Usual

         Type

NGK ZFR4F-11

         Interelectrode gap, mm

0.99÷1.09

      Platinum

         Type

NGK PFR4G-13

         Interelectrode gap, mm

1.19÷1.29

Resistance of candle wires, Ohm

Not higher than 25 000

Ignition order

1-3-4-2

Arrangement of cylinders and direction of rotation of the distributor of ignition

Cooling system

Characteristic

Value

Temperatures of operation of the thermostat, °C

   Beginning of opening

79

   Full opening

91

Size of a deflection of driving belts of auxiliary units, mm

Characteristic

Value

Steering pump

   New belt

9.5÷12.7

   The belt which was in the use

12.7÷15.9

Generator

Characteristic

Value

Models without To/in

 

   New belt

9.5÷12.7

   The belt which was in the use

6.4÷11.1

Models with To/in

   New belt

4.8÷7.9

   The belt which was in the use

9.5÷12.7

Brake system

Characteristic

Value

Minimum admissible thickness of frictional overlays of blocks of disk brake mechanisms, mm

1.6

Minimum admissible thickness of frictional overlays of boots of drum brake mechanisms, mm

2.4

Adjustment of the parking brake

6÷10 of clicks of a ratchet

Idling turns (in a minute)

Characteristic

Value

Civic  

   D16Y5 engine

 

      RKPP

670 ± 50

      AT and CVT

700 ± 50

   D16Y7 and D16Y8 engines

      USA

         RKPP

670 ± 50

         AT and CVT

700 ± 50

      Canada

750 ± 50

Integra

   B18B1 and B18C1 engines

750 ± 50

   B18C5 engine

800 ± 50

Parameters of the general adjustments

Characteristic

Value

Valvate gaps (at the cold engine), mm

 

   Civic

 

      Inlet valves

0.178÷0.229

      Final valves

0.229÷0.279

   Integra

      B18B1 engine

         Inlet valves

0.076÷0.127

         Final valves

0.152÷0.203

      B18C1 and B18C5 engines

         Inlet valves

0.152÷0.178

         Final valves

0.178÷0.203

Efforts of tightening of threaded connections, Nanometer

Connection type

Value

Drain stopper of AT and CVT 49
Drain stopper of RKPP

39

Jellied stopper of RKPP

45

Fuel filter

   Hollow bolt

14.9

   Nut of a hollow bolt

22

Spark plugs

17.6

Nuts of fastening of wheels

110