The device, service, repair of Honda Civic and Acura Integra - Check and adjustment of gaps of valves (each 24 000 km of a run or time in 12 months)//since 1994 release / civic2.ru

Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car



Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
- Routine maintenance
   Schedule of routine maintenance
   Specifications
   General information about settings and adjustments
   Check of levels of liquids (each 400 km of a run or weekly)
   Check of a condition of tires and pressure of their rating (each 400 km of a run or weekly)
   Check of level of liquid of the power steering (each 4 800 km of a run or time in three months)
   Check of the ATF AT/CVT level (each 4 800 km of a run or time in three months)
   Replacement of motive oil and oil filter (each 4 800 km of a run or time in three months)
   Check of a state and replacement of brushes of screen wipers (each 12 000 km of a run or time in 6 months)
   Check, service and charging of the rechargeable battery (each 12 000 km of a run or time in 6 months)
   Check of a state, adjustment of effort of a tension and replacement of driving belts, (each 12 000 km of a run or time in 6 months)
   Check of a state and replacement of the hoses located in a motive compartment (each 12 000 km of a run or times in 6 months)
   Check of a condition of components of the cooling system (each 12 000 km of a run or time in 6 months)
   Rotation of wheels (each 12 000 km of a run or time in 6 months)
   Check of the brake system (each 12 000 km of a run or time in 6 months)
   Check of a condition of seat belts (each 24 000 km of a run or time in 12 months)
   Check and adjustment of gaps of valves (each 24 000 km of a run or time in 12 months)
   Replacement of the filtering air cleaner element (each 24 000 km of a run or times in two years)
   Check of a condition of components of a power supply system (each 24 000 km of a run or time in 12 months)
   Check of level of the RKPP gearbox oil (each 24 000 km of a run or time in 12 months)
   Survey of components of a suspension bracket and steering drive, check of a condition of protective covers of power shafts
   Check of a condition of components of system of production of the fulfilled gases (each 9600 km of a run or times in 6 months)
   Check of a state and replacement of spark plugs
   Check of a state and replacement of VV of candle wires, a cover and the runner of the distributor (each 48 000 km of a run or time in 24 months)
   Check and replacement of the valve of system of the operated ventilation of a case (PCV) (each 48 000 km of a run or times in 24 months)
   Replacement of the fuel filter (each 48 000 km of a run or time in 24 months)
   Check and adjustment of turns of idling (each 48 000 km of a run or time in 24 months)
   Service of the cooling system (depletion, washing and filling) (each 48 000 km of a run or time in 24 months)
   Replacement of brake fluid (each 48 000 km of a run or time in 24 months)
   Replacement of liquid of automatic transmission (AT/CVT) (each 48 000 km of a run or time in 24 months)
   Replacement of the RKPP gearbox oil (each 48 000 km of a run or time in 24 months)
   Dumping of the counter of the indicator of intervals of service
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


http://flashlottos24.ru/



Check and adjustment of gaps of valves (each 24 000 km of a run or time in 12 months)

Check

 PERFORMANCE ORDER

1. Need for adjustment of valvate gaps arises only after replacement or repair of components of the valvate mechanism.
2. The simplest way of check of valves is listening of the engine at an open cowl. Indicates the raised noise background published by the valvate mechanism the need of carrying out adjustment.

Adjustment

Check and adjustment of gaps of valves are made at the cold engine.

 PERFORMANCE ORDER

1. Uncover a head of cylinders (see the corresponding Part of the Head Dvigatel).
2. Having turned a bent shaft, bring the piston of the first cylinder into the provision of VMT of the end of a step of compression (see the Head Dvigatel). The shaft is turned in the direction of normal rotation (clockwise) until VMT tag on its pulley is not combined with the index on the lower cover of a gas-distributing belt, and UP tag on a cogwheel (ah) of the camshaft(s) will not fall into a state for 12 hours.

3. Having brought the engine into this situation, it is possible to start check and adjustment of valves of the first cylinder (see an accompanying illustration).

4a. Begin with the inlet valve. Fill the required thickness an edge of the measuring probe (see Specifications) in a gap between an end face of a core of the valve and a yoke of the drive of the valve (Civic model), or a working ledge of the corresponding cam of the inlet camshaft and the lever of the drive of the valve (Integra model) (see accompanying illustrations).

4b. The probe has to slip in a gap with an insignificant resistance. In case of need weaken a lock-nut and weaken the adjusting screw, then begin to tighten the screw, trying to obtain the required effect on a probe edge.

5. Having fixed the adjusting screw from a provorachivaniye the screw-driver, tighten a lock-nut (see an accompanying illustration). Make sure that the gap in the course of tightening of a nut did not change, then, working in a similar manner, serially adjust gaps of the second inlet valve and two final.

6. Having turned a bent shaft on 180 ° counterclockwise (the pulley of the camshaft has to be turned on 90 °), bring the piston of the third cylinder into the provision of VMT of the end of a step of compression. At the same time UP tag on a cogwheel (ah) of the camshaft(s) has to pass into situation for 9 hours. Check and adjust valves of the third cylinder.
7. Turn a bent shaft for 180 ° counterclockwise (the tag (i) UP will fall down for 6 hours) and adjust valves of the fourth cylinder.
8. Having once again turned a bent shaft on 180 ° (the tag (i) UP has to pass into situation for 3 hours). Also repeat the procedure for valves of the second cylinder.
9. Having finished adjustment of valves, establish into place a cover of a head of cylinders (see the corresponding Part of the Head Dvigatel).