Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car



Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
- Routine maintenance
   Schedule of routine maintenance
   Specifications
   General information about settings and adjustments
   Check of levels of liquids (each 400 km of a run or weekly)
   Check of a condition of tires and pressure of their rating (each 400 km of a run or weekly)
   Check of level of liquid of the power steering (each 4 800 km of a run or time in three months)
   Check of the ATF AT/CVT level (each 4 800 km of a run or time in three months)
   Replacement of motive oil and oil filter (each 4 800 km of a run or time in three months)
   Check of a state and replacement of brushes of screen wipers (each 12 000 km of a run or time in 6 months)
   Check, service and charging of the rechargeable battery (each 12 000 km of a run or time in 6 months)
   Check of a state, adjustment of effort of a tension and replacement of driving belts, (each 12 000 km of a run or time in 6 months)
   Check of a state and replacement of the hoses located in a motive compartment (each 12 000 km of a run or times in 6 months)
   Check of a condition of components of the cooling system (each 12 000 km of a run or time in 6 months)
   Rotation of wheels (each 12 000 km of a run or time in 6 months)
   Check of the brake system (each 12 000 km of a run or time in 6 months)
   Check of a condition of seat belts (each 24 000 km of a run or time in 12 months)
   Check and adjustment of gaps of valves (each 24 000 km of a run or time in 12 months)
   Replacement of the filtering air cleaner element (each 24 000 km of a run or times in two years)
   Check of a condition of components of a power supply system (each 24 000 km of a run or time in 12 months)
   Check of level of the RKPP gearbox oil (each 24 000 km of a run or time in 12 months)
   Survey of components of a suspension bracket and steering drive, check of a condition of protective covers of power shafts
   Check of a condition of components of system of production of the fulfilled gases (each 9600 km of a run or times in 6 months)
   Check of a state and replacement of spark plugs
   Check of a state and replacement of VV of candle wires, a cover and the runner of the distributor (each 48 000 km of a run or time in 24 months)
   Check and replacement of the valve of system of the operated ventilation of a case (PCV) (each 48 000 km of a run or times in 24 months)
   Replacement of the fuel filter (each 48 000 km of a run or time in 24 months)
   Check and adjustment of turns of idling (each 48 000 km of a run or time in 24 months)
   Service of the cooling system (depletion, washing and filling) (each 48 000 km of a run or time in 24 months)
   Replacement of brake fluid (each 48 000 km of a run or time in 24 months)
   Replacement of liquid of automatic transmission (AT/CVT) (each 48 000 km of a run or time in 24 months)
   Replacement of the RKPP gearbox oil (each 48 000 km of a run or time in 24 months)
   Dumping of the counter of the indicator of intervals of service
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


http://flashlottos24.ru/



Check of a condition of components of the cooling system (each 12 000 km of a run or time in 6 months)

The wide range of engine failures is connected with violation of functioning of the cooling system. On the models equipped with AT, this system provides also ATF cooling, supporting by that optimum conditions for work of transmission.

 PERFORMANCE ORDER

1. Check a condition of components of the cooling system has to be made after full cooling of the power unit (not less than in three hours after an engine stop).
2. Uncover a radiator for what at first turn it to the first emphasis to the left. If the hissing indicating excessive pressure in system is heard wait for its termination, then press a cover a palm down and continue to turn before liberation to the left. Carefully wash out a cover clear water from within and outside. Also wash out a jellied mouth of a radiator. From the cleared surfaces all traces of corrosion have to be completely removed. The cooling liquid which is in system has to be rather transparent. If liquid is painted in color of a rust, the system has to be washed out and filled with fresh mix (see Service of the cooling system (depletion, washing and filling) (each 48 000 km of a run or times in 24 months)). If the level of liquid does not reach top, add in a radiator a little more mix of the required structure (see Check of levels of liquids (each 400 km of a run or weekly)).

3. Attentively examine the top and lower radiator hoses together with the hoses of system of heating of salon having smaller diameter, and located between the power unit and a partition of a motive compartment. Check hoses on all their length and in case of identification of cracks, swellings and signs of aging of material you make replacement of defective components. It is usually simpler to make out small cracks when tightening a hose (see an accompanying illustration). Regardless of a state it is necessary to change hoses approximately time in two years.


4. Check reliability of fastening of all hoses on the unions / branch pipes. Leak of cooling liquid is usually shown in the form of potek of rusty or white color on the surfaces surrounding its source. If hoses are fixed on unions/branch pipes by collars of the twisted type, it will be useful to replace the last more reliable worm or screw.
5. Having blown compressed air, or by means of a soft brush, remove from gaps between radiator heat exchanger plates old leaves, remains of insects and other garbage. Try not to damage soft plates of the heat exchanger and not to cut fingers about their keen edges.
6. Every second check, and also at the first signs of violation of functioning of the cooling system you make check of a cover of a radiator pressure. If near at hand there is no suitable equipment, ask for the help on car repair shop.