Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car



Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and bottom of the car
   Care of vinyl elements of finishing
   Care of an upholstery and carpets of salon
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and locks of the car
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of assemblies of forward and back bumpers
   Removal and installation of forward wings
   Removal and installation of a latch, cylinder of the lock and emphasis of a door of a back
   Removal, installation and adjustment of a door of a back
   Removal and installation of a latch, cylinder of the lock and emphasis of a cover of the luggage compartment
   Removal, installation and adjustment of a cover of the luggage compartment
   Driving cables of an otpuskaniye of locks of covers of the luggage compartment and hatch of a jellied mouth of the fuel tank
   Removal and installation of an internal upholstery of doors
   Removal, installation and adjustment of provision of doors
   Removal and installation of latches and cylinders of locks and external and internal handles of doors
   Removal and installation of door glasses
   Removal and installation of the regulator of a window regulator
   Removal and installation of rear-view mirrors
   Removal and installation of the central console
   Removal and installation of the dashboard
   Removal and installation of a casing of a steering column
   Removal and installation of an instrument guard
   Removal and installation of a forward fairing
   Removal and installation of seats
   + Control body sizes
+ Onboard electric equipment


http://flashlottos24.ru/



Removal, installation and adjustment of a door of a back

The door of a back has the considerable weight therefore it will be reasonable to secure with the help of the assistant.

Removal and installation

 PERFORMANCE ORDER

1. Open a door of a back and reliably record it in the top situation.

2. Remove the top decorative overlay of a doorway (see an accompanying illustration) and disunite sockets of the electrical wiring brought to a door.

3. Ask the assistant to take a door in open situation and disconnect from it both emphasis. Having sharply pulled, release an emphasis from hinges on a car body.

4. Give fastening nuts to a door of loopy levels (see an accompanying illustration). Remove a door from the car.

5. Installation is made upside-down.

Adjustment

 PERFORMANCE ORDER

1. Adjustment are made by weakening of bolts of fastening of loopy levels and the corresponding shift of a door in a body aperture. The door can be considered established correctly when its edges are parallel vertical and lower to the parties of an aperture.

2. In case of need make also adjustment of the drummer of the door lock, trying to obtain correct operation of the locking mechanism (see an accompanying illustration).

3. In conclusion adjust density of closing of a door by adjustment of height of persistent rubber pillows (see an accompanying illustration). The plane of a door has to fall into a closed position aflush with the surfaces of surrounding body panels.