Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car



Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and bottom of the car
   Care of vinyl elements of finishing
   Care of an upholstery and carpets of salon
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and locks of the car
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of assemblies of forward and back bumpers
   Removal and installation of forward wings
   Removal and installation of a latch, cylinder of the lock and emphasis of a door of a back
   Removal, installation and adjustment of a door of a back
   Removal and installation of a latch, cylinder of the lock and emphasis of a cover of the luggage compartment
   Removal, installation and adjustment of a cover of the luggage compartment
   Driving cables of an otpuskaniye of locks of covers of the luggage compartment and hatch of a jellied mouth of the fuel tank
   Removal and installation of an internal upholstery of doors
   Removal, installation and adjustment of provision of doors
   Removal and installation of latches and cylinders of locks and external and internal handles of doors
   Removal and installation of door glasses
   Removal and installation of the regulator of a window regulator
   Removal and installation of rear-view mirrors
   Removal and installation of the central console
   Removal and installation of the dashboard
   Removal and installation of a casing of a steering column
   Removal and installation of an instrument guard
   Removal and installation of a forward fairing
   Removal and installation of seats
   + Control body sizes
+ Onboard electric equipment




Removal and installation of an instrument guard

Considered in the present manual of the car are equipped with safety cushions (SRS). When performing any works near sensors of blows, a steering column or the dashboard disconnect SRS (see schemes of electric connections at the end of the Head Onboard electric equipment).


 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!


2. Remove a steering wheel (see the Head Podvesk and steering).
3. Remove the central console (see Removal and installation of the central console.
4. Remove facing of an instrument guard (see Removal and installation of the dashboard).
5. Remove a combination of devices (see the Head Onboard electric equipment).
6. Remove all sections of the dashboard (see Removal and installation of the dashboard).
7. Give fixture (nuts and bolts) of the assembly block of safety locks and the handle of an otpuskaniye of the lock of a cowl (see Removal and installation of a latch of the lock of a cowl and cable of its drive and the Head Onboard electric equipment).

8. Give fixing nuts and lower a steering column (see an accompanying illustration).

9a. Turn out fixing screws.

9b. Having hooked the screw-driver, release from the dashboard deflectors of air ducts (see accompanying illustrations).

10. Having hooked the screw-driver, remove forward overlays of door thresholds.

11. Turn out side screws of fastening of assembly of an instrument guard (see an accompanying illustration).

12. Remove the radio tape recorder (see the Head Onboard electric equipment) and assembly of management of a heater (see the Head of the Cooling system and heating).

13. Turn out the lower screws in the central part of an instrument guard (see an accompanying illustration).

14. Turn out bolts of fastening of the upper edge of a guard to a partition of a motive compartment.
15. Pull a guard on yourself and disconnect from it all electrical wiring.
16. Through a steering column remove a guard from the car.
17. Installation is made upside-down.