Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car



Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and bottom of the car
   Care of vinyl elements of finishing
   Care of an upholstery and carpets of salon
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and locks of the car
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of assemblies of forward and back bumpers
   Removal and installation of forward wings
   Removal and installation of a latch, cylinder of the lock and emphasis of a door of a back
   Removal, installation and adjustment of a door of a back
   Removal and installation of a latch, cylinder of the lock and emphasis of a cover of the luggage compartment
   Removal, installation and adjustment of a cover of the luggage compartment
   Driving cables of an otpuskaniye of locks of covers of the luggage compartment and hatch of a jellied mouth of the fuel tank
   Removal and installation of an internal upholstery of doors
   Removal, installation and adjustment of provision of doors
   Removal and installation of latches and cylinders of locks and external and internal handles of doors
   Removal and installation of door glasses
   Removal and installation of the regulator of a window regulator
   Removal and installation of rear-view mirrors
   Removal and installation of the central console
   Removal and installation of the dashboard
   Removal and installation of a casing of a steering column
   Removal and installation of an instrument guard
   Removal and installation of a forward fairing
   Removal and installation of seats
   + Control body sizes
+ Onboard electric equipment


http://flashlottos24.ru/



Removal, installation and adjustment of a cover of the luggage compartment

The cover of the luggage compartment has the considerable weight therefore it will be reasonable to secure with the help of the assistant.

Removal and installation

 PERFORMANCE ORDER

1. Lift a cover and cover with protective covers or just old blankets of edge of an aperture of the luggage compartment for the purpose of protection of a paint and varnish covering.
2. Disconnect the driving cables brought to a cover or an electrical wiring.

3. Lead round a loop marker, having marked situation them on a cover (see an accompanying illustration).

4. Ask the assistant to hold a cover in open situation and give fastening bolts to it both loops (see an accompanying illustration). Together carefully uncover the car.

5. Installation is made upside-down.

Track that loops were located strictly in the former provisions on a cover.

Adjustment

 PERFORMANCE ORDER

1. Adjustment of a cover in a body aperture is made by weakening of fixture of loops.
2. For the purpose of control of the size of shift of a cover lead round loops a marker (see paragraph 3 above).
3. Weaken fixture and correct the provision of a cover in the corresponding direction. Adjustment should be made short steps, every time tightening fixture and making control check, accurately closing a cover.
4. Make sure of serviceability of functioning of the lock of a cover. In case of need make adjustment of position of its drummer. Try to achieve that the lock reliably held a cover when it is aflush with surrounding body panels. Lead round the drummer a marker, weaken fixture and make necessary adjustment. Do not forget to tighten bolts reliably.
5. Assembly of a castle latch, as well as loop of a cover has to be greased regularly with lubricant on a lithium basis.
6. In conclusion correct height of provision of a cover in the closed state – as appropriate screw/turn out persistent rubber pillows.