Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car



Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
+ Routine maintenance
- Engine
   - Repair of the engine without extraction from the car - the Civic model
      General information
      Preparatory actions and the list of repair procedures which can be executed without extraction of the engine from the car
      Reduction of the piston of the first cylinder in the provision of the top dead point (TDP)
      Removal and installation of a cover of a head of cylinders
      Removal and installation of the inlet pipeline
      Removal and installation of a final collector
      The VTEC systems - the general information and check of a condition of components
      Removal, check of a state and installation of assembly of yokes
      Replacement of valvate springs with plates and maslootrazhatelny caps
      Removal, check of a state and installation of a gas-distributing belt and cogwheels of the GRM drive
      Replacement of a forward epiploon of a bent shaft
      Removal, check of a state and installation of the camshaft
      Removal and installation of a head of cylinders
      Removal and installation of the pallet of a case of the engine
      Removal, check of a state and installation of the oil pump
      Removal and installation of a flywheel / driving disk
      Replacement of a back epiploon of a bent shaft
      Check of a state and replacement of support of a suspension bracket of the power unit
   + Repair of the engine without extraction from the car - the Integra model
   + General and capital repairs of the engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




Repair of the engine without extraction from the car – the Civic model

General information

This Part of the Head Dvigatel is devoted to the repair of the 4-cylinder petrol engine of 1.6 l equipped with system of injection of fuel which is not connected with extraction from the car (in situ). All procedures demanding dismantle of the power unit are provided in the Part the General and capital repairs of the engine.

Three versions of engines are applied to a complete set of the considered Honda Civic models. All versions are among engines with one camshaft of the top arrangement (SOHC). About 4 valves (16V) are the share of each of cylinders.

Engines are completed with one of two versions of electronic system of correction of phases of gas distribution (VTEC). To more detailed description of a design and the principle of functioning of the VTEC systems it is devoted the VTEC Systems - the general information and check of a condition of components.

The used engines have the following designations:

D16Y7

1.6 l, 16V, SOHC

D16Y8

1.6 l, 16V, SOHC VTEC

D16Y5

1.6 l, 16V, SOHC VTEC-E *

* Designation "E" is entered by the Honda company for engines with the increased efficiency of return.