Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car



Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
- Control systems of the engine
   Specifications
   System of onboard diagnostics (OBD) - the principle of functioning and codes of malfunctions
   Removal and PCM/ECM installation
   Check of serviceability of a state and replacement of the sensor of provision of a butterfly valve (TPS)
   Check of serviceability of a state and replacement of the sensor of absolute pressure in the pipeline (MAR)
   Check of serviceability of a state and replacement of the sensor of temperature of the soaked-up air (IAT)
   Check of serviceability of a state and replacement of the sensor of temperature of cooling liquid of the engine (EST)
   Check of serviceability of a state and replacement of the sensor of VMT/provision of a cranked shaft / situation of pistons in cylinders of the engine (TDC/CKP/CYP)
   Check of serviceability of a state and replacement of the sensor of fluctuations of a bent shaft (CKF)
   Check of serviceability of a state and replacement of the detector of control of electric loadings (ELD)
   Check of serviceability of a state and replacement of the sensor switch of pressure in system of hydrostrengthening of a wheel (PSP)
   Check of serviceability of a state and replacement of the oxygen sensor (l-probe)
   Check of serviceability of a state and replacement of the sensor of a detonation
   Check of serviceability of a state and replacement of the sensor of speed of the movement of the car (VSS)
   System of stabilization of turns of idling - the general information, check of a state and replacement of the IAC valve
   Check of serviceability of a state and replacement of the thermosensitive valve of turns of bystry idling (FIT)
   System of a perepuskaniye of the soaked-up air - the general information, check of a state and replacement of a diaphragm of the IAB valve
   System of the operated ventilation of a case (PCV)
   System of recirculation of the fulfilled gases (EGR) - the general information, check of a state and replacement of components
   System of catching of fuel evaporations (EVAP) - the general information, check of a state and replacement of components
   The catalytic converter - the general information, check of a state and replacement
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




Check of serviceability of a state and replacement of the sensor of absolute pressure in the pipeline (MAR)

Check

 PERFORMANCE ORDER

1. Check reliability of connection to the sensor of the electric socket. Estimate reliability of landing of plugs and a condition of an electrical wiring. In case of need make the corresponding recovery repair of a chain.

2. Make identification of an electrical wiring of the sensor (see an accompanying illustration).


Color of isolation of wires can vary depending on car model (see below).

3. The following color scale of an electrical wiring of the MAR sensor is characteristic of the Civic models:
   a) Yellow-red: food;
   b) Green-white: grounding;
   c) Red-green: a signal on ECM/PCM.
4. On the Integra 1994 and 1995 models of of the issue the following coding of an electrical wiring of the sensor is used:
   a) Yellow-red: food (B18B1 engines);
   b) Ochroleucous: food (B18C1 engines);
   c) White-yellow: grounding:
   d) Green-white: a signal on ECM/PCM.
5. Coloring of isolation of an electrical wiring of the MAR sensor for the Integra models since 1996 of the issue:
   a) Yellow-red: food;
   b) Red-green: signal;
   c) Green-white: grounding.
6. Disunite the electric socket of the sensor, without starting the engine, include ignition and measure tension between plugs of wires of food and grounding of the socket of an electrical wiring. The result of measurement has to make about 5 V, otherwise check a condition of an electrical wiring, execute necessary recovery repair.
7. Turn out fixing screws and remove the sensor from the throttle case (see an illustration above), without disconnecting from it an electrical wiring.
8. Connect the voltmeter between plugs of an alarm wire and wire of grounding (use the straightened office paper clip). At the included ignition (do not start the engine) create depression in the basis of the sensor throttle removed from the case. About increase in depth of depression alarm tension has to decrease (see the accompanying table), otherwise replace the sensor.

Depth of depression, mm of mercury.

The size of alarm tension, In

0

3.0

127

2.5

254

2.0

381

1.5

508

1.0

635

0.5

Replacement

 PERFORMANCE ORDER

1. Disconnect from the MAR sensor an electrical wiring (see an illustration above).
2. Turn out fixing screws and remove the sensor from the throttle case.
3. Installation is made upside-down.