The device, service, repair of Honda Civic and Acura Integra - Removal and installation of assembly of the back shock-absorber with a screw spring//since 1994 release / civic2.ru

Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car



Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   Specifications
   Removal and installation of assembly of the forward shock-absorber with a screw spring
   Replacement of the shock-absorber or screw spring of rack-mount assembly of a forward suspension bracket
   Removal and installation of the forward stabilizer of cross stability with basic plugs
   Removal and installation of the top control lever of a forward suspension bracket
   Removal and installation of the lower control lever of a forward suspension bracket
   Removal and installation of a rotary fist and stupichny assembly
   Removal and installation of assembly of a forward nave with the wheel bearing
   Replacement of spherical support
   Removal and installation of assembly of the back shock-absorber with a screw spring
   Removal and installation of a bar of the back stabilizer of cross stability with basic plugs
   Removal and installation of assembly of a back nave with the wheel bearing
   Removal and installation of levers of a back suspension bracket
   Removal and installation of a steering wheel
   Removal and installation of tips of steering drafts
   Replacement of protective covers of the steering mechanism
   Removal and installation of the steering mechanism
   Removal and installation of the steering pump
   Removal of air from a hydraulic path of system of strengthening of a wheel
   Wheels and tires - the general information
   Angles of installation of wheels
+ Body
+ Onboard electric equipment


http://flashlottos24.ru/



Removal and installation of assembly of the back shock-absorber with a screw spring

 PERFORMANCE ORDER

1. Weaken wheel nuts, a back of the car and establish to a poddomkratta it on props. Remove back wheels.

2. At the corresponding complete set remove a decorative cover of the top support of damping assembly (see an accompanying illustration).

3. Give fixing nuts of the top support (see an accompanying illustration). It is necessary to leave average big tightened.


Only two side nuts are subject to Otdavany.


4. Give a bolt of the lower support of the shock-absorber (see an accompanying illustration).

5. Delay the lower lever down and take assembly of the shock-absorber from a screw spring from under the car.
6. The description of the procedure of check of a condition of components of damping assembly similarly stated in Replacement of the shock-absorber or a screw spring of rack-mount assembly of a forward suspension bracket for assembly of a forward suspension bracket.
7. Installation is made upside-down. Track that all fixture was tightened with the required effort.