Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car



Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   Specifications
   Removal and installation of assembly of the forward shock-absorber with a screw spring
   Replacement of the shock-absorber or screw spring of rack-mount assembly of a forward suspension bracket
   Removal and installation of the forward stabilizer of cross stability with basic plugs
   Removal and installation of the top control lever of a forward suspension bracket
   Removal and installation of the lower control lever of a forward suspension bracket
   Removal and installation of a rotary fist and stupichny assembly
   Removal and installation of assembly of a forward nave with the wheel bearing
   Replacement of spherical support
   Removal and installation of assembly of the back shock-absorber with a screw spring
   Removal and installation of a bar of the back stabilizer of cross stability with basic plugs
   Removal and installation of assembly of a back nave with the wheel bearing
   Removal and installation of levers of a back suspension bracket
   Removal and installation of a steering wheel
   Removal and installation of tips of steering drafts
   Replacement of protective covers of the steering mechanism
   Removal and installation of the steering mechanism
   Removal and installation of the steering pump
   Removal of air from a hydraulic path of system of strengthening of a wheel
   Wheels and tires - the general information
   Angles of installation of wheels
+ Body
+ Onboard electric equipment


http://flashlottos24.ru/



Removal and installation of the steering pump

Steering pump of models of early years of release

1 — Bolts of the pressure head line
2 — the Collar of the returnable line

3 — the Adjusting bolt
4 — Fixing bolts

Steering pump of models of late years of release

1 — Bolts of the pressure head line
2 — the Collar of the returnable line

3 — the Adjusting bolt
4 — the Fixing bolt


 PERFORMANCE ORDER

1. Disconnect from the battery at first a negative wire, then positive.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!


2. Disconnect from the pump hydraulic lines (see illustrations above). Pay attention to distinction of a design of nipple knots of connection of pressure head and returnable lines: the returnable hose fastens on the union a collar whereas the pressure head line is connected by means of two bolts. Right after a detachment to a zakuporta the open ends of both hoses for the purpose of minimization of losses of hydraulic liquid and in order to avoid hit in system of dirt. Replace a sealing ring of nipple connection of the pressure head line.
3. Turn out an adjusting bolt of the steering pump.
4. Give fixing bolts and remove the pump from the engine.
5. Installation is made upside-down. Do not forget to remove at the end of the procedure air from steering system (see Removal of air from a hydraulic path of system of strengthening of a wheel) and to adjust effort of a tension of a driving belt (see the Head Routine maintenance).