The device, service, repair of Honda Civic and Acura Integra - Removal and installation of the top control lever of a forward suspension bracket//since 1994 release / civic2.ru

Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car



Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   Specifications
   Removal and installation of assembly of the forward shock-absorber with a screw spring
   Replacement of the shock-absorber or screw spring of rack-mount assembly of a forward suspension bracket
   Removal and installation of the forward stabilizer of cross stability with basic plugs
   Removal and installation of the top control lever of a forward suspension bracket
   Removal and installation of the lower control lever of a forward suspension bracket
   Removal and installation of a rotary fist and stupichny assembly
   Removal and installation of assembly of a forward nave with the wheel bearing
   Replacement of spherical support
   Removal and installation of assembly of the back shock-absorber with a screw spring
   Removal and installation of a bar of the back stabilizer of cross stability with basic plugs
   Removal and installation of assembly of a back nave with the wheel bearing
   Removal and installation of levers of a back suspension bracket
   Removal and installation of a steering wheel
   Removal and installation of tips of steering drafts
   Replacement of protective covers of the steering mechanism
   Removal and installation of the steering mechanism
   Removal and installation of the steering pump
   Removal of air from a hydraulic path of system of strengthening of a wheel
   Wheels and tires - the general information
   Angles of installation of wheels
+ Body
+ Onboard electric equipment


http://flashlottos24.ru/



Removal and installation of the top control lever of a forward suspension bracket

 PERFORMANCE ORDER

1. Weaken nuts of fastening of the corresponding forward wheel. The car also establish to Poddomkratta it on props. Remove a wheel. Prop up the lower lever of a suspension bracket a jack.

2. Take the forelock and weaken a koronchaty nut of a spherical finger of a support of the top lever (see an accompanying illustration). Do not remove a nut finally in order to avoid spontaneous separation of the lever from a rotary fist so far.

3. By means of a stripper release a sharovy finger of a support of the top lever from a rotary fist (see an accompanying illustration). Remove a koronchaty nut (try not to allow losses of a fist, in case of need tie up damping assembly by a wire).

4a. On the Civic models, working in a motive compartment, give nuts, take axial bolts.

4b. Remove assembly of the top lever from the car (see accompanying illustrations).

5. On the Integra models give nuts of fastening of the top lever to the shock basis (see an accompanying illustration) and remove the lever, having led round it around a screw spring.

6. Installation is made upside-down. Track respect for the required efforts of tightening of fixture.

On the Civic models raise a forward suspension bracket a jack, imitating its full speed during the movement and only after it tighten axial bolts of the lever.