The device, service, repair of Honda Civic and Acura Integra - Removal and installation of the forward stabilizer of cross stability with basic plugs//since 1994 release / civic2.ru

Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car



Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   Specifications
   Removal and installation of assembly of the forward shock-absorber with a screw spring
   Replacement of the shock-absorber or screw spring of rack-mount assembly of a forward suspension bracket
   Removal and installation of the forward stabilizer of cross stability with basic plugs
   Removal and installation of the top control lever of a forward suspension bracket
   Removal and installation of the lower control lever of a forward suspension bracket
   Removal and installation of a rotary fist and stupichny assembly
   Removal and installation of assembly of a forward nave with the wheel bearing
   Replacement of spherical support
   Removal and installation of assembly of the back shock-absorber with a screw spring
   Removal and installation of a bar of the back stabilizer of cross stability with basic plugs
   Removal and installation of assembly of a back nave with the wheel bearing
   Removal and installation of levers of a back suspension bracket
   Removal and installation of a steering wheel
   Removal and installation of tips of steering drafts
   Replacement of protective covers of the steering mechanism
   Removal and installation of the steering mechanism
   Removal and installation of the steering pump
   Removal of air from a hydraulic path of system of strengthening of a wheel
   Wheels and tires - the general information
   Angles of installation of wheels
+ Body
+ Onboard electric equipment


http://flashlottos24.ru/



Removal and installation of the forward stabilizer of cross stability with basic plugs

 PERFORMANCE ORDER

1. Cock the parking brake. Weaken nuts of fastening of forward wheels. A car front also establish to Poddomkratta it on props. Remove wheels.

2. Turn out bolts of fastening of assembly brackets of a bar of the stabilizer of cross resistance to the car bottom (see an accompanying illustration).

3. Disconnect bolts of racks of a bar of the stabilizer from the lower levers of a suspension bracket (see an accompanying illustration). Try to remember an order of installation of remote rings, washers and plugs on a bolt of fastening of a rack.

4. Take a bar of the stabilizer of cross stability from under the car.
5. Remove assembly brackets from a bar and attentively examine rubber plugs on existence of cracks, a priznakovotverdevaniye and aging of material. Defective plugs are subject to replacement.
6. Installation is made upside-down.