Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car



Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   General information and precautionary measures
   Search of causes of failures of electric equipment
   Safety locks - the general information
   Chain breakers
   The relay - the general information and check of serviceability of functioning
   Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system
   Check of serviceability of functioning and replacement of understeering switches
   Check of serviceability of functioning and replacement of the switch of ignition and lock of blocking of a steering column
   Check of serviceability of functioning and replacement of switches of the dashboard
   Check of serviceability of functioning of measuring instruments of a combination of devices
   Removal and installation of a combination of devices
   Removal and installation of the radio receiver and loudspeakers
   Removal and installation of the antenna of the radio receiver
   Replacement of lamps of head headlights
   Adjustment of the direction of optical axes of head headlights
   Replacement of block headlights
   Replacement of lamps
   Running fires of daylight (DRL)
   Check of serviceability of functioning and replacement of an electric motor of the drive of screen wipers
   Check of serviceability of functioning and replacement of a horn of a horn
   Check of serviceability of functioning and recovery repair of a heater of back glass
   Control system of speed (темпостат) - general information and check of serviceability of functioning
   The electric drive of window regulators - general information and check of serviceability of functioning
   The uniform lock - general information and check of serviceability of functioning
   The electric drive of external rear-view mirrors - general information and check of serviceability of functioning
   Safety cushions - the general information
   + Schemes of electric connections - the general information




Removal and installation of the antenna of the radio receiver

Civic models

 PERFORMANCE ORDER

1. Disconnect an antenna cable from the radio receiver (see Removal and installation of the radio receiver and loudspeakers).
2. Tie up a piece of a string by the end of an antenna cable.

3. Turn out fixing screws and remove the antenna from a body rack (see an accompanying illustration).

4. Tie up a string, having attached it to a cable of the new antenna. Omit antenna assembly on the regular place, at the same time involving a cable for a string in a rack.
5. Untie a string and connect an antenna cable to assembly of the radio receiver. Screw screws of fastening of antenna assembly and strongly tighten them.

Integra models

Mast of the antenna equipped with the electric drive

 PERFORMANCE ORDER

1. Stick with an adhesive tape the part of a wing of the car surrounding an antenna mast for protection of a paint and varnish covering. Give a fixing nut and remove a remote washer (see an accompanying illustration).

2. Ask the assistant to turn on the radio receiver and to lift the antenna in the top situation. Directing an antenna mast in process of promotion, remove it from the car (see an accompanying illustration).

3. At installation deploy the antenna teeths back and enter teeths into gearing with a driving cable. Turn on the radio receiver and allow an electric motor to involve an antenna mast in a wing (see an accompanying illustration).

4. Establish into place a remote washer and screw a fixing nut.

If the remote washer is equipped with a flat sealant, the last has to enter in the plug, settling down under a washer. The sealing ring is put over a remote washer.

Electric motor of the drive of an antenna mast

 PERFORMANCE ORDER

1. On models with a body like Sedan remove the panel of a side internal upholstery in the luggage compartment. On the Hatchback models remove the Back side panel of an internal upholstery of salon.

2. Give a nut of fastening of the antenna, remove a washer (see an illustration). Give a nut of fastening of a driving electric motor (see an accompanying illustration). Disunite the electric socket and an antenna cable. Remove assembly of an electric motor.

3. Installation is made upside-down.