Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
General information and precautionary measures
Search of causes of failures of electric equipment
Safety locks - the general information
Chain breakers
The relay - the general information and check of serviceability of functioning
Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system
Check of serviceability of functioning and replacement of understeering switches
Check of serviceability of functioning and replacement of the switch of ignition and lock of blocking of a steering column
Check of serviceability of functioning and replacement of switches of the dashboard
Check of serviceability of functioning of measuring instruments of a combination of devices
Removal and installation of a combination of devices
Removal and installation of the radio receiver and loudspeakers
Removal and installation of the antenna of the radio receiver
Replacement of lamps of head headlights
Adjustment of the direction of optical axes of head headlights
Replacement of block headlights
Replacement of lamps
Running fires of daylight (DRL)
Check of serviceability of functioning and replacement of an electric motor of the drive of screen wipers
Check of serviceability of functioning and replacement of a horn of a horn
Check of serviceability of functioning and recovery repair of a heater of back glass
Control system of speed (темпостат) - general information and check of serviceability of functioning
The electric drive of window regulators - general information and check of serviceability of functioning
The uniform lock - general information and check of serviceability of functioning
The electric drive of external rear-view mirrors - general information and check of serviceability of functioning
Safety cushions - the general information
+ Schemes of electric connections - the general information
|
Replacement of lamps
Forward indexes of turns / parking fires and marker lights
Civic models
|
|
1. For replacement of the left lamp (from the driver) at the started engine turn out wheels against the stop to the right, then switch off ignition. The right lamp changes at the wheels which are turned out to the left.
2. Release a clamp and remove a loker of the corresponding wheel arch.
3. Turn a lamp cartridge on 1/4 turns counterclockwise and take it from a casing of assembly of a lamp. Press a lamp in a cartridge, turn it on 1/8 turns counterclockwise, then pull outside and release from cartridge assembly. Installation is made upside-down. |
|
Integra
|
|
|
|
1a. Give fixing screws and take assembly of a lamp from the car wing panel (see accompanying illustrations). |
|
|
1b. Turn a cartridge on 1/8 turns counterclockwise and take it from a casing of lantern assembly. |
2. Take a lamp from the boss.
3. Installation is made upside-down. |
|
Back marker lights and stoplights
|
|
1. Open a cover a luggage carrier/door of a back and remove a decorative cover of the corresponding back lamp.
|
|
2a. Turn a lamp cartridge counterclockwise and take it from a casing of lantern assembly (see accompanying illustrations). |
|
|
2b. An arrangement of lamps of the back combined lamp on the Integra models (the decorative cover is removed). |
3. Press a lamp in a cartridge, turn counterclockwise and take outside.
4. Installation is made upside-down. |
|
Stoplights of the top level
Civic
|
|
1. Remove decorative covers (if they are provided) two fixing screws, give the last and remove assembly of a stoplight of the top level from the body panel.
2. Turn a cartridge counterclockwise and take it from a casing of lantern assembly. Having pulled, take a lamp.
3. Installation is made upside-down. |
|
Integra
|
|
|
|
1. Open a luggage carrier, having provided thereby access to a stoplight of the top level (see an accompanying illustration). |
2. Turn a lamp cartridge counterclockwise and release it from lantern assembly.
3. Having pulled outside, take a lamp from the boss.
4. Installation is made upside-down. |
|
Illumination of devices
|
|
1. Remove a combination of devices (see Removal and installation of a combination of devices).
|
|
2. Turn a lamp cartridge counterclockwise from assembly of a combination of devices (see an accompanying illustration). |
3. Having pulled outside, take a lamp from the boss.
4. Installation is made upside-down. |
|
Illumination of registration plate
|
|
1. Turn out two fixing screws and remove a lens of a lamp of illumination of registration plate.
|
|
2. Turn a lapovy cartridge counterclockwise and take it from lantern assembly (see an accompanying illustration). |
3. Having pulled outside, release a lamp from the boss.
4. Installation is made upside-down. |
|
Internal lamps (salon, luggage compartment)
|
|
|
|
1. Having accurately hooked the screw-driver, remove a lens from the corresponding lamp. |
2. Release a lamp from spring plugs. If there is a need for a lamp poddevaniye, start the lever only under edges of socles of a lamp in order to avoid damage of a flask.
3. Installation is made upside-down. |
|
|
|