The device, service, repair of Honda Civic and Acura Integra - Check of serviceability of functioning and replacement of understeering switches//since 1994 release / civic2.ru

Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car



Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   General information and precautionary measures
   Search of causes of failures of electric equipment
   Safety locks - the general information
   Chain breakers
   The relay - the general information and check of serviceability of functioning
   Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system
   Check of serviceability of functioning and replacement of understeering switches
   Check of serviceability of functioning and replacement of the switch of ignition and lock of blocking of a steering column
   Check of serviceability of functioning and replacement of switches of the dashboard
   Check of serviceability of functioning of measuring instruments of a combination of devices
   Removal and installation of a combination of devices
   Removal and installation of the radio receiver and loudspeakers
   Removal and installation of the antenna of the radio receiver
   Replacement of lamps of head headlights
   Adjustment of the direction of optical axes of head headlights
   Replacement of block headlights
   Replacement of lamps
   Running fires of daylight (DRL)
   Check of serviceability of functioning and replacement of an electric motor of the drive of screen wipers
   Check of serviceability of functioning and replacement of a horn of a horn
   Check of serviceability of functioning and recovery repair of a heater of back glass
   Control system of speed (темпостат) - general information and check of serviceability of functioning
   The electric drive of window regulators - general information and check of serviceability of functioning
   The uniform lock - general information and check of serviceability of functioning
   The electric drive of external rear-view mirrors - general information and check of serviceability of functioning
   Safety cushions - the general information
   + Schemes of electric connections - the general information


http://flashlottos24.ru/



Check of serviceability of functioning and replacement of understeering switches

Considered in the present manual of the car are equipped with safety cushions (SRS). When performing any works near sensors of blows, a steering column or the dashboard disconnect SRS (see Safety cushions - the general information). You do not make check of the SRS models by means of any type of the diagnostic equipment.

The combined understeering switches of control of lighting fixtures and cleaners/washers of glasses

Check

 PERFORMANCE ORDER

1. The combined switch of external lighting is located on the left side of a column and provides management of functioning of indexes of turns, head headlights, a light signal and parking fires. From the opposite side of a column there is a switch of management of cleaners/washers of glasses.
2. Remove the switch(es) (see paragraph 1, Replacement).

3a. By means of an ohmmeter or the lamp sampler equipped with the individual power supply check correctness of existence of conductivity between switch plugs in its various provisions (see accompanying illustrations and tables is lower): the ID card of plugs of the combined understeering switch of control of lighting fixtures

3b. The ID card of plugs of the combined understeering switch of management of windshield cleaners/washers. In case of identification of violations replace the switch.


Card of conditions of the understeering switch of control of lighting fixtures


POSITION OF THE SWITCH

EXISTENCE OF CONDUCTIVITY BETWEEN PLUGS

Parking fires

1 and 2

Head headlights (passing beam)

   Civic (USA)

1 and 2; 3 and 6

   Civic (Canada)

1 and 2; 3, 4 and 6

   Integra

1 and 2; 4 and 6

Head headlights (driving beam)

   Civic (USA)

1 and 2; 5 and 6

   Civic (Canada)

1 and 2; 4, 5 and 6

   Integra

1 and 2; 4, 5 and 6

Blinking head headlights

5 and 6

Indexes of the right turn

8 and 10

Indexes of the left turn

8 and 9

Card of conditions of the understeering switch of management of cleaners/washers of wind and back glasses

POSITION OF THE SWITCH

EXISTENCE OF CONDUCTIVITY BETWEEN PLUGS

SWITCH OF MANAGEMENT OF WINDSHIELD CLEANERS/WASHERS

Vykl

1 and 7

Interval mode

1 and 7; 3 and 4

Slow mode

1 and 5

Bystry mode

2 and 5

Glass washing

4 and 8

Fog

2 and 5

SWITCH OF MANAGEMENT OF CLEANERS/WASHERS OF BACK GLASS

Vykl

1 and 2

In C

1 and 3

Glass washing

4 and 6

Replacement

 PERFORMANCE ORDER

1a. Remove sections of a casing of a steering column. By means of the small screw-driver accurately disunite the electric socket of the switch. Turn out two fixing screws.

1b. Remove assembly of the switch from a steering column (see accompanying illustrations).

2. Installation is made upside-down.

Switch of management of functioning of a control system of speed (tempostaty)

Check

 PERFORMANCE ORDER

1. Remove the switch from a steering column (see paragraph 3 below).

2. By means of an ohmmeter or the lamp sampler equipped with the individual power supply check existence of conductivity between switch plugs in both of its provisions (see an accompanying illustration). In case of need replace assembly.

Replacement

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery and wait at least three minutes before starting implementation of the procedure.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!


2. Uncover with the switch.

3. Turn out fixing screws (see an accompanying illustration), disunite electric sockets and remove the switch from a steering wheel.

3. Installation is made upside-down.